BLOCKS

Try net blocks are used on commercial fishing vessels to run cable through when dropping and retrieving nets.

TRY NET BLOCK GALVANIZED	Sheave Diameter	Working Load Limit (tons)	Approx. Weight Per Piece (lbs)
	6"	5	23.13
	8"	10	57.2

CLEATS

Dock cleats are bolted to a dock in order to secure boats.

GALVANIZED DOCK CLEATS	Length	Bolt Size	Approx. Weight Per Piece (lbs)
	5"	#12	0.33
	6"	1/4"	0.38
	8"	5/16"	1
	10"	3/8"	2
	12"	3/8"	3.6
	14"	1/2"	5.9

WIRE ROPE CLIPS*

Malleable wire rope clips are used for making eye terminations with right regular lay cable and only for light duty uses with small applied loads such as hand rails, fencing, guard rails, etc. These clips are NOT to be used for overhead lifting.

ZINC PLATED MALLEABLE FED. SPEC. FF-C-450 D, TYPE 1, CLASS 2 CAUTION: NEVER USE MALLEABLE CLIPS FOR OVERHEAD LIFTING	Size	Minimum Number Required	Approx. Weight Per Piece (lbs)
	1/16"	3	.03
	1/8"	3	.04
	3/16"	3	.06
	1/4"	3	.13
	5/16"	3	.15
	3/8"	3	.21
	7/16"	4	.24
	1/2"	4	.37
	9/16"	4	.54
	5/8"	4	.59
	3/4"	5	.83
	7/8"	5	1.25
	1"	6	1.5
	1-1/8"	7	2.42

Drop forged clips are used for making eye terminations on right regular lay cable. These clips are used for critical, heavy-duty overhead loads such as support lines, guy lines, tie-downs, scaffolds, etc. NOT for overhead lifting.

GALVANIZED DROP FORGED CLIPS FED. SPEC. FF-C-450 D, TYPE 1, CLASS 1	Size	Minimum Number Required	Approx. Weight Per Piece (lbs)
	1/8"	2	.05
	3/16"	2	.09
	1/4"	2	.18
	5/16"	2	.25
	3/8"	2	.42
	7/16"	3	.70
	1/2"	3	.73
	9/16"	3	.80
	5/8"	3	.90
	3/4"	4	1.5
	7/8"	4	2
	1"	5	2.5
	1-1/8"	6	3.1
	1-1/4"	7	4.6
	1-3/8"	7	5.2
	1-1/2"	8	5.9

*ALSO AVAILABLE IN AISI 316 STAINLESS STEEL.

EYE BOLTS*

Eye bolts (also known as eyebolts) are used for tensioning cable between a span, lifting an object, or holding an object overhead. They can also be used to secure objects in place.

FORGED EYE BOLTS REGULAR NUT HOT DIPPED GALVANIZED, FORGED STEEL	Shank Diameter & Length	Length of Thread	Eye Diameter		Working Load Limit (lbs)	Approx. Weight Per Piece (lbs)
			I.D.	O.D.
	1/4"X2"	1-1/2"	1/2"	1"	500	0.08
	1/4"X4"	2-1/2"	1/2"	1"	500	0.12
	5/16"X2-1/4"	1-1/2"	5/8"	1-1/4"	800	0.13
	5/16"X4-1/4"	2-1/2"	5/8"	1-1/4"	800	0.25
	3/8"X2-1/2"	1-1/2"	3/4"	1-1/2"	1,200	0.23
	3/8"X4-1/2"	2-1/2"	3/4"	1-1/2"	1,200	0.30
	3/8"X6"	2-1/2"	3/4"	1-1/2"	1,200	0.35
	1/2"X3-1/4"	1-1/2"	1"	2"	2,200	0.50
	1/2"X6"	3"	1"	2"	2,200	0.66
	1/2"X8"	3"	1"	2"	2,200	0.82
	1/2"X10"	3"	1"	2"	2,200	0.88
	1/2"X12"	3"	1"	2"	2,200	1.14
	1/2"X15"	4"	1"	2"	2,200	1.17
	5/8"X4"	2"	1-1/4"	2-1/2"	3,500	1.03
	5/8"X6"	3"	1-1/4"	2-1/2"	3,500	1.18
	5/8"X8"	3"	1-1/4"	2-1/2"	3,500	1.35
	5/8"X10"	3"	1-1/4"	2-1/2"	3,500	1.54
	5/8"X12"	4"	1-1/4"	2-1/2"	3,500	1.67
	5/8"X15"	5"	1-1/4"	2-1/2"	3,500	2.01
	3/4"X4-1/2"	2"	1-1/2"	3"	5,200	1.69
	3/4"X6"	3"	1-1/2"	3"	5,200	1.85
	3/4"X8"	3"	1-1/2"	3"	5,200	2.08
	3/4"X10"	3"	1-1/2"	3"	5,200	2.35
	3/4"X12"	4"	1-1/2"	3"	5,200	2.58
	3/4"X15"	5"	1-1/2"	3"	5,200	2.98
	7/8"X5"	2-1/2"	1-3/4"	3-1/2"	7,200	2.7
	7/8"X8"	4"	1-3/4"	3-1/2"	7,200	3.08
	7/8"X12"	4"	1-3/4"	3-1/2"	7,200	4
	1"X6"	3"	2"	4"	10,000	4.21
	1"X9"	4"	2"	4"	10,000	4.69
	1"X12"	4"	2"	4"	10,000	5.4
	1"X18"	7"	2"	4"	10,000	6.5
	1-1/4"X12"	4"	2-1/2"	5"	15,200	9
	1-1/4"X20"	6"	2-1/2"	5"	15,200	12.1

*ALSO AVAILABLE IN AISI 304 STAINLESS STEEL

HAMMERLOCKS

Hammerlocks are used for making alloy chain slings.

HAMMERLOCKS	Size (in)	Inside Length (in)	Inside Width (in)	Working Load Limit (lbs)	Approx. Weight Per Piece (lbs)
	1/4"	2.05	0.82	3,250	0.25
	5/16"	2.42	0.95	4,500	0.5
	3/8"	2.72	1.08	6,600	0.6
	1/2"	3.33	1.4	11,250	1.25
	5/8"	3.92	1.67	16,500	2.3
	3/4"	4.84	1.87	23,000	4
	7/8"	5.82	2.12	28,750	5.75

HOOKS

These spring (or snap) hooks are used to secure a variety of things to each other, such as tarps to cable, etc. They are for light duty use and NOT for overhead lifting.

SNAP HOOK (SPRING HOOK) GALVANIZED	Wire Diameter	Working Load Limit (lbs)	Approx. Weight Per Piece (lbs)
	3/16"	220	0.02
	1/4"	260	0.06
	9/32"	400	0.10
	5/16"	500	0.15
	11/32"	550	0.20
	3/8"	770	0.32
	7/16"	930	0.42
	1/2"	990	0.60

CLEVIS GRAB HOOKS
Forged Carbon Steel Forged Alloy Steel

Clevis grab hooks are used on chain to secure it to itself or another object.

Carbon	Chain Size	Working Load Limit (lbs)		Dimensions				Approx. Weight Per Piece (lbs)	Alloy
		Carbon	Alloy	A	B	C	D
	1/4"	2,600	3,500	.32"	.34"	.31"	1.64"	0.4
	5/16"	3,900	4,500	.43"	.44"	.38"	2.02"	0.7
	3/8"	5,400	7,100	.48"	.50"	.44"	2.41"	1
	7/16"	7,200	8,750	.57"	.56"	.56"	2.75"	1.5
	1/2"	9,200	12,000	.66"	.66"	.63"	3.19"	2.1
	5/8"	13,000	15,800	.71"	.78"	.75"	4.09"	4.2
	3/4"	16,200	20,200	.94"	.94"	.88"	4.63"	6.5

CLEVIS SLIP HOOKS
Forged Carbon Steel Forged Alloy Steel

Clevis slip hooks are used on chain to secure it to itself or another object.

Carbon	Chain Size	Working Load Limit (lbs)		Dimensions				Approx. Weight Per Piece (lbs)	Alloy
		Carbon	Alloy	A	B	C	D
	1/4"	1,950	2,750	.32"	.94"	.38"	2.56"	0.5
	5/16"	2,875	4,300	.43"	1.06"	.44"	2.87"	0.75
	3/8"	4,000	5,250	.45"	1.31"	.47"	3.25"	1.2
	7/16"	5,000	7,000	.59"	1.56"	.56"	3.7"	2.06
	1/2"	6,500	9,000	.57"	1.69"	.63"	4"	2.8
	5/8"	9,250	13,500	.71"	2"	.75"	4.94"	4.75
	3/4"	--	19,250	1.18"	2.5"	1"	6.09"	10.3

Eye hoist hooks with latch are used on wire rope and chain slings to attach objects to be lifted.

Carbon	Working Load Limit (tons)		Approx. Weight Per Piece (lbs)	Alloy
	Carbon	Alloy
	3/4	1	.55
	1	1-1/2	.75
	1-1/2	2	1.25
	2	3	1.7
	3	5	3.6
	5	7	7.08
	7-1/2	11	13

SAFETY WINCH HOOK CARBON

Safety winch hooks can be used on small diameter slings, but are mainly used on winch line.

SORTING HOOK ALLOY

Sorting hooks are used on wire rope and chain slings for special lifting applications.

SWIVEL HOOK CARBON

Swivel hooks are used on wire rope slings and garbage trucks for picking up dumpsters.